Woodworking: Protection When Working With Wood - Ignoring Could Potentially Harm Your Health Or Kill

Woodworking: Basic Safety Tips

Woodworking can be a dangerous undertaking if you are not careful and choose to disregard safety guidelines. A circular saw, router, or other piece of power equipment can disfigure and even kill if not used properly. Even hand tools, which must be extremely sharp to provide best results, can cause serious injuries. In addition, the sawdust and fumes from wood can be harmful to the lungs if inhaled on a regular basis, especially if the wood was harvested from an orchard or tree farm where pesticides were used to control insects.

Fortunately, the advances in equipment and safety products have made it much more easy to have a safe working environment. Many tools come with built-in safety features like blade guards or emergency shut off switches. Other items such as feather boards and bench dogs can be made or purchased very inexpensively. And other parts of woodworking safety don't cost a thing, but draw instead on practice and common sense.

There are several key aspects of safety when it comes to woodworking, and they apply whether you have an advanced shop with many different power tools or are working with basic hand tools in your basement or den.

Protect Yourself
Protecting your body from accidents is a key aspect of woodworking safety. Unfortunately, people get lazy or too comfortable or they feel that the safety equipment gets in the way. A vast majority of shop accidents and injuries occur because people were not using their safety equipment.

Eye Protection
One of the main concerns when working with wood is eye protection. Wood chips can fly off when sawing, drilling, hammering, or any other task that penetrates the material. It usually happens far too quickly to be able to close your eyes or look away. Safety glasses solve this problem. In addition, if tools should break or a part comes loose, your eyes and forehead will be protected. Too many accidents have happened to just brush away this safety concern. It would be very difficult to pursue any woodworking interests with only one eye.

A good pair or safety glasses should be on everyone's list of safety equipment and should be used any time you will be cutting or removing wood with force or power tools. A quality pair of glasses will cost around $12 and could last you your entire life if properly cared for and put away when not in use. Those who need vision correction can even purchase safety classes with bifocal inserts in different strengths for under $20.

Ear Protection
Some power tools can be quite noisy and can damage hearing. Even repetitive hammering produces loud sharp noises. Many of us know a longtime woodworker who has difficulty hearing due to exposure to equipment over the years. Protecting your ears from the loud decibels is important, especially if you use noisy power equipment such as saws, on a regular basis.

Earplugs work well, earmuffs work even better, and a combination of the two is ideal when working with loud equipment that produces sound in the high decibel range. Earplugs cost just pennies, and a set of earmuffs runs about $15. You can get them with a radio and antenna built in for around $50.

Dust Collection
Over the past decade or two, extensive research has been done on the hazards of inhaling wood dust and particles, and the results show that it can cause respiratory diseases. Treated lumber or wood that came from commercial orchards is especially volatile. It is important to capture and remove these particles from the air or protect yourself from breathing them.

A work area with good ventilation will help, but even if you are working in an open area, you will be breathing in the dust if you are standing over the machine while it cuts the wood. If you plan to do a lot of cutting, drilling or sanding, it is best to have a machine that keeps the particles away from your face and prevents you from breathing them in.

There are several methods available, with the most basic being a dust mask. These lightweight masks made of filtering materials fit over your nose and mouth and are typically held in place by a rubber band. Innovative designs improve breathing and deter fogging of safety glasses. A box of 10 high quality dust masks costs around $10. They do not filter out toxic materials with fumes.

You can also purchase a dust collection system or respirator that you wear on your head or strap on your body. These systems are battery powered and allow you to move around freely. Some people feel that they are uncomfortable and impair vision, but they can be a critical way to protect your long-term health if you plan to spend a lot of time woodworking. Prices range from $50 for a basic system to over $250 for a system that also has head and eye protection.

Another option for dust collection is to use a localized unit that mounts under your worktable, saw, or other equipment and plugs into an outlet. They range from $50 to $250 depending on size, power, filtration system and other factors. A complete shop dust collection system, with a 1- horse motor and large dust ports averages around $300.

Control Your Environment
It is also important to prepare your work environment before starting a project. Be sure to put unneeded items away and pick things up off the floor. The less clutter, the less likely that something will get in the way or cause you to trip or be distracted.

In addition, good lighting will help you to see your work (and your fingers) better. Positional lighting such as a shop lamp will allow you to move around more and to direct the lighting exactly where it is needed.

Try to find an area where people will not be coming in and out. This is for your safety as for theirs, and is especially important when children are present. Be sure to unplug your equipment when you are done working and put away dangerous items such as utility knives and saw blades.

Avoid clothing that hangs loose, including long sleeves or apron strings. Long hair should be pulled back as well. Most power tools have a rotary motion that can grab and wrench a loose piece of fabric or strand of hair. Even if you are just making one cut or a quick drill hole, all it takes is one second for things to go bad. If you get in the habit of following these steps every time, you will develop good safety skills.

As one woodworking expert described, "Safety is like using your turn signal. If you do it every time you go to make a turn, even if it's just going out of the driveway, then you will remember to do it in every situation, especially when it counts the most."

But don't get so comfortable with your work and surroundings that you forget to think about what you are doing. Even though you may have done the same technique many times before, it is important to be conscious of the motions you are making and the movement of the tools.

One other environmental factor mentioned by several of the woodworkers was to have a phone nearby in case an accident does occur and you need to call for help. If you use a portable phone, be sure to put it in the same spot each time so you can go directly to it if needed. It is also a good idea to keep a first aid kit in your work area, just in case.

Take Your Time
As we all know, when we rush to finish something, mistakes tend to happen. In woodworking, this could be disastrous. Take your time, double check your clamps, footing, hand placement, power cord location, and other variables before you start the equipment. Even with hand tools, it is important to make sure you aren't going to saw through something electrical or nail into your hand.

Don't force a saw cut. If a blade gets hung up, back it out and start over. Also, wait for a tool to stop completely before taking your eye off of it or moving it away from the wood. Most drills, saws and other power tools take a few seconds to quit spinning after the power is stopped.

If a task feels uncomfortable, don't do it. You might get a tiny jitter in your belly the first time you start up the circular saw or feel the screw tighten down as you drill, and this is normal. But if you are overly apprehensive and can't hold your materials firmly or concentrate on what you are doing, back off and take a few breaths or find someone to help you with that particular step.

Another important aspect of woodworking safety is to know your tools and use them appropriately and safely. To learn more please refer to the newly published "Woodworking Beginner's Guide" mentioned at the end of this article. It describes many tools that beginners are likely to need and offers information about how to use and care for them.

Copyright © 2005 by Ferhat Gul. All rights reserved. You may redistribute this article in its unedited entirety, including this resource box, with all hyperlinked URLs kept intact. Ferhat Gul is the publisher of the brand-new "Woodworking Beginner's Guide - Tips From Experienced Woodworkers to Help You Get Started", made just for people who love woodworking. This comprehensive, yet compact woodworking introduction for beginners is easy to read and helps to save time, money and effort.

---

Gemstone Collecting

Personally, I have become fascinated with gemstones (precious and semi-precious stones). I am amazed at the array of colors and properties of these little treasures found in... Read More

Sewing A Button On By Hand

I have so many people come into my shop saying something like ? I can't even sew on a button. How sad it is that a whole... Read More

How to Make Your Own Soap Favors for Weddings and Baby Showers

Want to make soap as a gift for your party guests? Here are some simple tips for making soap gifts and favors:1. There are literally hundreds of... Read More

Woodworking Tools: Right Selection And Care Will Save You Money, Part 5

Woodworking: Tools Of The Trade, Part 5 - Tools For AssemblyA civilization's maturity and intelligence is judged, in part, by the diversity and sophistication of its tools.... Read More

Is There Money To Be Made In Depression Glass

You've seen the shows on television. You've watched the auctions online. You've read the stories in the newspaper.There always seems to be someone somewhere with an old... Read More

Creative Soap Crafts

Soap is a craft that is fun and easy to make. It's a great project to do with your kids.Simply follow the instructions below and you'll be... Read More

Jewelry and the Art of Selling

Two of the most frequently asked questions we get at the Online Jewelry Appraisal Center is:"How do I sell an item of Antique or Estate Jewelry?" or...... Read More

Use Tags and Embellishments to Give Your Scrapbooks that Personal Yet Professional Touch

Tags are a little added touch of professionalism that adds to the overall well thought out look to your scrapbook. Tags can be used for accents, captions,... Read More

Saltwater Coral Reef Aquariums - 5 Tips for Success

Do you dream of watching the natural beauty of the undersea reef life while sitting in your living room?Whether your goal is a nano reef tank or... Read More

A Look at Patriotic Lapel Pins

Perhaps the most popular type of lapel pin is the patriotic pin. Dating back to the Civil War in the United States, lapel pins that declare a... Read More

Woodworking Tools: Right Selection And Care Will Save You Money, Part 3

Woodworking: Tools Of The Trade, Part 3 - Tools For Measuring & MarkingA civilization's maturity and intelligence is judged, in part, by the diversity and sophistication of... Read More

Civil War Uniforms: 5 Tips on Making Your Trousers Last Forever!

Are your pants wearing out too fast?Does it look like you are expecting a flood because your pants are too short?Make your Civil War Uniform trousers last... Read More

Diecast Collectibles: The Collectors? Guide to Making a Profit

Millions of people have made a hobby of collecting items of one sort or another, but some take it to a higher level. These collectors view their... Read More

Machine Embroidery Digitizing - What Youll Need Besides the Software

You've purchased an embroidery machine, practiced the designs that were included in the package, maybe even bought a disc of designs or downloaded a few designs off... Read More

Molding Leather Armor

In order to mould leather armor, soak it in water until it becomes pliable and soft. Then place it in the mould until it dries and hardens.Cuir... Read More

Security Advice for Gold Jewelry, Diamonds, and Gemstones

For you to enjoy your treasures, they need to be somewhere close and accessible, but NOT in the Bedside Jewelry Box.Although we DO advise a Jewelry Box... Read More

Why Chainmaille Jewelry Craft

Jewelry is very prevalent, but jewelry that directly compliments your personal style or makes your statement for you perfectly is not prevalent. Find out some ways this... Read More

Creating Vacation Memories

My daughter and I recently had the opportunity to spend a week at Disney World in Orlando, Florida. We were totally overwhelmed with all the things there... Read More

Tracing Your Family History

Let me say straight away that tracing your family ancestry is a great hobby but very addictive, so unless you want to get well and truly hooked,... Read More

Hollywood Gets Crafty - Knitting And Crocheting Not Just For Grandma Anymore

Sometimes it's hard to imagine that the stars who shine so brightly on cinematic screens are people just like the rest of us. We often think that... Read More

Money Making Hobbies - Which Ones?

Which ones can be money making hobbies? A friend made a life-sized cow out of plywood once. He painted it, put it in the yard, and people... Read More

Craft Fairs, Bazaars & Flea Markets?Oh, My!

Many names are associated with events such as these. Craft Fairs, Bazaars, Flea Markets and Swap Meets are a few names you can find. Whatever the name?they... Read More

Baby Boomers Need Creative Practical Hobbies

"Well how are you really enjoying your retirement?" I asked out of interest, "it was great to start with" he said, but lately, I've just become kind... Read More

What Is An Un-circulated Coin?

You may have heard the terms proof coin and un-circulated coin, but what's the difference between these two? To understand the difference between a proof and un-circulated... Read More

From Clutter To Treasure: Re-use and Not Reject!

Make use of clutter to decorate your home! Sounds strange? Believe me its possible! While moving into my new house, I had to get rid of a... Read More

Jewelry Making: Measuring for Bracelets Without a Tape

Your cousin's friend in Saskatchewan has asked you to design a custom bracelet for her. You have all the beads, materials, and tools, but you're stumped about... Read More